Part Name: Body Housing
Material: A356, A319, EN AC -Al Si7Mg, EN AC-Al Si10Mg, EN AC- AlSi5Cu,EN AC- AlSi9Cu, ZL101, ZL104
Weight: 2.50kg/pcs
Description: 1. Body Housing is made by aluminum alloy sand casting process, Suitable for machinery equipments.
2. Full inspection on all dimensions, characteristics, and notes on drawing for each sample submitted.
3. Process Flow Diagram, Design FMEA, Process FMEA, Control Plan, Material Specifications 4. Further machining work: turning, cutting, milling, grinding
5. Surface finish process: shot blasting

Part Name: Aluminum Machinery Arm
Material: A356, A319, EN AC -Al Si7Mg, EN AC-Al Si10Mg, EN AC- AlSi5Cu,EN AC- AlSi9Cu, ZL101, ZL104,ZL107
Weight: 5.50kg/pcs
Description: 1. Aluminum machinery arm is made by aluminium alloy sand casting, T6 heat treatment process.
2. Full inspection on all dimensions, characteristics, and notes on drawing for each sample submitted.
3. Process Flow Diagram, Design FMEA, Process FMEA, Control Plan, Material Specifications 4. Further machining work: turning, cutting, milling, grinding
5. Surface finish process: shot blasting

Part Name: Sand casting parts
Material: A356, A319, EN AC -Al Si7Mg, EN AC-Al Si10Mg, EN AC- AlSi5Cu,EN AC- AlSi9Cu, ZL101, ZL104,ZL107
Weight: 5.50kg/pcs
Description:1. Sand casting part is made from aluminium alloy, T51 heat treatment process.
2. Full inspection on all dimensions, characteristics, and notes on drawing for each sample submitted.
3. Process Flow Diagram, Design FMEA, Process FMEA, Control Plan, Material Specifications 4. Further machining work: turning, cutting, milling, grinding
5. Surface finish process: shot blasting

Part Name: High pressure die casting part
Material: A380, A390, AlSi9Cu3, EN AC-Al Si10Mg(Fe), EN AC-Al Si12(Fe),
EN AC-AlSi12Cu1(Fe),ADC10,ADC12
Weight: 1.50kg/pcs
Description: High pressure die casting part is made form aluminum alloy, and then dills, taps and shot blasting process, which is suitable for tooling fitting.

Part Name: Pressure die casting part
Material: A380, A390, AlSi9Cu3, EN AC-Al Si10Mg(Fe), EN AC-Al Si12(Fe),
EN AC-AlSi12Cu1(Fe),ADC10,ADC12
Weight: 1.30kg/pcs
Description:Pressure die casting part is made form aluminum alloy, and then dills, taps and shot blasting process, which is suitable for tooling fitting.

Part Name: Die casting part
Material: A380, A390, AlSi9Cu3, EN AC-Al Si10Mg(Fe), EN AC-Al Si12(Fe),
EN AC-AlSi12Cu1(Fe), ADC10, ADC12
Weight: 1.00kg/pcs
Description: Die casting part is made form aluminum alloy, and then dills, taps and shot blasting process, which is suitable for tooling fitting.

Part Name: Sand cast parts
Material: A356, A319, EN AC -Al Si7Mg, EN AC-Al Si10Mg, EN AC- AlSi5Cu,EN AC- AlSi9Cu, ZL101, ZL104,ZL107
Weight: 3.50kg/pcs
Description:1. Sand cast part is made from aluminium alloy, T6 heat treatment process, which is suitable for truck parts.
2. Full inspection on all dimensions, characteristics, and notes on drawing for each sample submitted.
3. Process Flow Diagram, Design FMEA, Process FMEA, Control Plan, Material Specifications 4. Further machining work: turning, cutting, milling, grinding
5. Surface finish process: shot blasting

Part Name: Chill casting part
Material: A356, A319, EN AC -Al Si7Mg, EN AC-Al Si10Mg, EN AC- AlSi5Cu,EN AC- AlSi9Cu, ZL101, ZL104,ZL107
Weight: 0.50kg/pcs
Description: 1. Chill casting part is made from aluminium alloy, which is suitable for Moto parts.
2. Full inspection on all dimensions, characteristics, and notes on drawing for each sample submitted.
3. Process Flow Diagram, Design FMEA, Process FMEA, Control Plan, Material Specifications 4. Further machining work: turning, cutting, milling, grinding
5. Surface finish process: polishing

Part Name: Permanent mould casting part
Material: A356, A319, EN AC -Al Si7Mg, EN AC-Al Si10Mg, EN AC- AlSi5Cu,EN AC- AlSi9Cu, ZL101, ZL104,ZL107
Weight: 0.50kg/pcs
Description:1. Permanent mould casting part is made from aluminum alloy, which is suitable for Moto parts.
2. Full inspection on all dimensions, characteristics, and notes on drawing for each sample submitted.
3. Process Flow Diagram, Design FMEA, Process FMEA, Control Plan, Material Specifications 4. Further machining work: turning, cutting, milling, grinding
5. Surface finish process: polishing

Part Name: Actuator
Material: A356, A319, EN AC -Al Si7Mg, EN AC-Al Si10Mg, EN AC- AlSi5Cu,EN AC- AlSi9Cu, ZL101, ZL104,ZL107
Weight: 0.50—5.50kg/pcs
Description:
1. Actuator is made by aluminum alloy gravity casting.
2. Full inspection on all dimensions, characteristics, and notes on drawing for each sample submitted.
3. Process Flow Diagram, Design FMEA, Process FMEA, Control Plan, Material Specifications 4. Further machining work: turning, cutting, milling, grinding

Part Name: Sand-cast aluminum
Material: A356, A319, EN AC -Al Si7Mg, EN AC-Al Si10Mg, EN AC- AlSi5Cu,EN AC- AlSi9Cu, ZL101, ZL104,ZL107
Weight: 2.50kg/pcs
Description:1. Sand-cast aluminum is suitable for truck parts.
2. Full inspection on all dimensions, characteristics, and notes on drawing for each sample submitted.
3. Process Flow Diagram, Design FMEA, Process FMEA, Control Plan, Material Specifications 4. Further machining work: turning, cutting, milling, grinding
5. Surface finish process: shot blasting

Part Name: Aluminum gravity casting
Material: A356, A319, EN AC -Al Si7Mg, EN AC-Al Si10Mg, EN AC- AlSi5Cu,EN AC- AlSi9Cu, ZL101, ZL104,ZL107
Weight: 1.50kg/pcs
Description:1. Aluminum gravity casting is suitable for machinery parts.
2. Full inspection on all dimensions, characteristics, and notes on drawing for each sample submitted.
3. Process Flow Diagram, Design FMEA, Process FMEA, Control Plan, Material Specifications 4. Further machining work: turning, cutting, milling, grinding
5. Surface finish process: shot blasting

Part Name: Aluminum alloy die casting
Material: A380, A390, AlSi9Cu3, EN AC-Al Si10Mg(Fe), EN AC-Al Si12(Fe),
EN AC-AlSi12Cu1(Fe), ADC10, ADC12
Weight: 1.50kg/pcs
Description: Aluminum alloy die casting is made by hot chamber machine, and then dills, taps and shot blasting process.

Part Name: Aluminium gravity casting
Material: A356, A319, EN AC -Al Si7Mg, EN AC-Al Si10Mg, EN AC- AlSi5Cu,EN AC- AlSi9Cu, ZL101, ZL104,ZL107
Weight: 1.50kg/pcs
Description:1. Aluminium gravity casting is suitable for machinery parts.
2. Full inspection on all dimensions, characteristics, and notes on drawing for each sample submitted.
3. Process Flow Diagram, Design FMEA, Process FMEA, Control Plan, Material Specifications 4. Further machining work: turning, cutting, milling, grinding
5. Surface finish process: shot blasting  

Part Name: Aluminum die casting alloy
Material: A380, A390, AlSi9Cu3, EN AC-Al Si10Mg(Fe), EN AC-Al Si12(Fe),
EN AC-AlSi12Cu1(Fe), ADC10, ADC12
Weight: 2.50kg/pcs
Description: Aluminum die casting alloy is made by hot chamber machine, and then dills, taps and shot blasting process, which is suitable for Moto parts